Creative Speculation

If they were competent investigators, then they probably would have tested for the presence of thermite or thermate in the 93 WTC car bombing.

as a competent investigator, you want to to test for all types of commonly used explosives and/incendiaries so there's no reason why they shouldn't have tested for the presence of thermite/thermate along with other types of explosive/incendiary materials that could have been used in the 93 bombing.


--------------------------------------

Military uses

Thermite hand grenades and charges are typically used by armed forces in both an anti-materiel role and in the partial destruction of equipment; the latter being common when time is not available for safer or more thorough methods.[30][31] For example, thermite can be used for the emergency destruction of cryptographic equipment when there is a danger that it might be captured by enemy troops. Because standard iron-thermite is difficult to ignite, burns with practically no flame and has a small radius of action, standard thermite is rarely used on its own as an incendiary composition. It is more usually employed with other ingredients added to enhance its incendiary effects. Thermate-TH3 is a mixture of thermite and pyrotechnic additives which have been found to be superior to standard thermite for incendiary purposes.[32] Its composition by weight is generally about 68.7% thermite, 29.0% barium nitrate, 2.0% sulfur, and 0.3% of a binder (such as PBAN).[32] The addition of barium nitrate to thermite increases its thermal effect, produces a larger flame, and significantly reduces the ignition temperature.[32] Although the primary purpose of Thermate-TH3 by the armed forces is as an incendiary anti-materiel weapon, it also has uses in welding together metal components.

A classic military use for thermite is disabling artillery pieces, and it has been used for this purpose during and since World War II; such as at Pointe du Hoc, Normandy.[33] Thermite can permanently disable artillery pieces without the use of explosive charges, and therefore thermite can be used when silence is necessary to an operation. There are several ways to do this. By far the most destructive method is to weld the weapon shut by inserting one or more armed thermite grenades into the breech and then quickly closing it. This makes the weapon impossible to be loaded.[34] An alternative method is to insert an armed thermite grenade down the muzzle of the artillery piece, fouling the barrel and making the weapon very dangerous to fire. Yet another method is to use thermite to weld the traversing and elevation mechanism of the weapon, making it impossible to aim properly.[citation needed]


Thermite was also used in both German and Allied incendiary bombs during World War II.[35][36] Incendiary bombs usually consisted of dozens of thin thermite-filled canisters (bomblets) ignited by a magnesium fuse. Incendiary bombs destroyed entire cities due to the raging fires that resulted from their use.[citation needed] Cities that primarily consisted of wooden buildings were especially susceptible. These incendiary bombs were utilized primarily during nighttime air raids.[citation needed] Bombsights could not be used at night, creating the need to use munitions that could destroy targets without the need for precision placement.

http://en.wikipedia.org/wiki/Thermite#Civilian_uses